LED
ROE Graphite GP2.6 LED Panel 1×1
- 2.604mm pixel pitch with 4-in-1 common anode LEDs
- 1500 nit calibrated brightness and 7680Hz refresh rate
- 500 x 500 x 80mm half panel at just 5.2 kg
- Smart-lock system cuts assembly time up to 40 percent
- Front and rear service with hot-swappable modules and PSU
- Supports curved, ceiling, raked and double-sided builds
Product Details
Lightweight Indoor LED Panel for Fast Load-Ins
The ROE Graphite GP2.6 in the 1×1 format is a 500 x 500mm half panel with a 2.604mm pixel pitch. Graphite is built around weight savings, coming in at roughly 17 kg per square meter without sacrificing image quality. The half panel weighs just 5.2 kg, so techs can move and place tiles quickly. As a result, Graphite suits productions where rigging capacity, truck space or labor hours drive the build. For covering large areas faster, the Graphite GP2.6 1×2 full panel doubles the coverage per tile.
LED Wall Rental Specs and Image Performance
Each 1×1 panel carries 192 x 192 pixels with 4-in-1 common anode LEDs. Calibrated brightness reaches 1500 nits, and the refresh rate runs 7680Hz for clean on-camera performance. Additionally, power draw stays modest at 160W maximum and 80W average per panel. The 80mm deep cabinet supports both front and rear service, and both the LED modules and PSU can be swapped while the wall stays live.
Smart-Lock Assembly and Flexible Configurations
Graphite’s integrated magnet-assisted assembly and smart-lock system cut installation time by up to 40 percent compared to conventional panels. Panels hang and stack, and the platform supports curved displays, ceilings, raked angles and double-sided builds. Meanwhile, the 1×1 half panel format tops off walls built from full panels or builds squarer canvases without custom cuts. ROE also offers corner and edge solutions for the series.
Rental Applications
The GP2.6 fits corporate general sessions, trade shows, touring and broadcast sets where weight and setup speed matter. If you have questions about mixing 1×1 and 1×2 panels, rigging or processing for your wall, our product experts can help. Add the Graphite GP2.6 1×1 to your cart to request a quote.
Product Details
Lightweight Indoor LED Panel for Fast Load-Ins
The ROE Graphite GP2.6 in the 1×1 format is a 500 x 500mm half panel with a 2.604mm pixel pitch. Graphite is built around weight savings, coming in at roughly 17 kg per square meter without sacrificing image quality. The half panel weighs just 5.2 kg, so techs can move and place tiles quickly. As a result, Graphite suits productions where rigging capacity, truck space or labor hours drive the build. For covering large areas faster, the Graphite GP2.6 1×2 full panel doubles the coverage per tile.
LED Wall Rental Specs and Image Performance
Each 1×1 panel carries 192 x 192 pixels with 4-in-1 common anode LEDs. Calibrated brightness reaches 1500 nits, and the refresh rate runs 7680Hz for clean on-camera performance. Additionally, power draw stays modest at 160W maximum and 80W average per panel. The 80mm deep cabinet supports both front and rear service, and both the LED modules and PSU can be swapped while the wall stays live.
Smart-Lock Assembly and Flexible Configurations
Graphite’s integrated magnet-assisted assembly and smart-lock system cut installation time by up to 40 percent compared to conventional panels. Panels hang and stack, and the platform supports curved displays, ceilings, raked angles and double-sided builds. Meanwhile, the 1×1 half panel format tops off walls built from full panels or builds squarer canvases without custom cuts. ROE also offers corner and edge solutions for the series.
Rental Applications
The GP2.6 fits corporate general sessions, trade shows, touring and broadcast sets where weight and setup speed matter. If you have questions about mixing 1×1 and 1×2 panels, rigging or processing for your wall, our product experts can help. Add the Graphite GP2.6 1×1 to your cart to request a quote.