LED
ROE Graphite GP2.6 LED Panel 1×2
- 2.604mm pixel pitch with 4-in-1 common anode LEDs
- 1500 nit calibrated brightness and 7680Hz refresh rate
- 500 x 1000 x 80mm full panel at 8.5 kg
- Smart-lock system cuts assembly time up to 40 percent
- Front and rear service with hot-swappable modules and PSU
- Supports curved, ceiling, raked and double-sided builds
Product Details
Large Format Lightweight LED Panel for Walls and Ceilings
The ROE Graphite GP2.6 in the 1×2 format is a 500 x 1000mm full panel with a 2.604mm pixel pitch. The tall format covers ground fast: each tile carries 192 x 384 pixels, so a wall goes up with half the panel count of a square tile build. However, weight stays low. The full panel weighs 8.5 kg, roughly 17 kg per square meter, which eases rigging loads and speeds truck packs. For topping off walls or building squarer canvases, the Graphite GP2.6 1×1 half panel matches the platform in a 500 x 500mm format.
LED Wall Rental Specs and Image Performance
Calibrated brightness reaches 1500 nits with 4-in-1 common anode LEDs and a 7680Hz refresh rate for clean on-camera performance. Power draw runs 320W maximum and 160W average per panel. Additionally, the 80mm deep cabinet supports front and rear service. Both the LED modules and PSU can be swapped while the wall stays live, so a failed component doesn’t interrupt the show.
Smart-Lock Assembly for Faster Installs
Graphite pairs large, light panels with integrated magnet-assisted assembly and a smart-lock system. Therefore, installation time drops by up to 40 percent compared to conventional LED panels, and the bigger tile format compounds the savings on large walls. Panels hang and stack, and the platform supports curved displays, ceilings, raked angles and double-sided builds. ROE also offers corner and edge solutions for the series.
Rental Applications
The GP2.6 1×2 fits corporate general sessions, trade shows, touring and broadcast sets where large walls need to go up on tight schedules. If you have questions about mixing panel formats, rigging or processing for your build, our product experts can help. Add the Graphite GP2.6 1×2 to your cart to request a quote.
Product Details
Large Format Lightweight LED Panel for Walls and Ceilings
The ROE Graphite GP2.6 in the 1×2 format is a 500 x 1000mm full panel with a 2.604mm pixel pitch. The tall format covers ground fast: each tile carries 192 x 384 pixels, so a wall goes up with half the panel count of a square tile build. However, weight stays low. The full panel weighs 8.5 kg, roughly 17 kg per square meter, which eases rigging loads and speeds truck packs. For topping off walls or building squarer canvases, the Graphite GP2.6 1×1 half panel matches the platform in a 500 x 500mm format.
LED Wall Rental Specs and Image Performance
Calibrated brightness reaches 1500 nits with 4-in-1 common anode LEDs and a 7680Hz refresh rate for clean on-camera performance. Power draw runs 320W maximum and 160W average per panel. Additionally, the 80mm deep cabinet supports front and rear service. Both the LED modules and PSU can be swapped while the wall stays live, so a failed component doesn’t interrupt the show.
Smart-Lock Assembly for Faster Installs
Graphite pairs large, light panels with integrated magnet-assisted assembly and a smart-lock system. Therefore, installation time drops by up to 40 percent compared to conventional LED panels, and the bigger tile format compounds the savings on large walls. Panels hang and stack, and the platform supports curved displays, ceilings, raked angles and double-sided builds. ROE also offers corner and edge solutions for the series.
Rental Applications
The GP2.6 1×2 fits corporate general sessions, trade shows, touring and broadcast sets where large walls need to go up on tight schedules. If you have questions about mixing panel formats, rigging or processing for your build, our product experts can help. Add the Graphite GP2.6 1×2 to your cart to request a quote.