Cobalt 9990-ENC2-H264-IP HD/SD-SDI/CVBS (Dual Channel) H.264 Encoder with Streaming IP Output
E-CODE: M146D-
Product Details
The 9990-ENC-H264-IP HD/SD-SDI/CVBS H.264 Encoders with Streaming IP Output provide a card-based solution for distribution of MPEG-4 encoding. These encoders are specifically for distribution, with cost savings of offering only streaming IP instead of IP and DVB-ASI which is not needed for distribution. The 9990-ENC-H264-IP is perfectly suited for IP video distribution over the Internet or over a dedicated IP link. Utilizing the openGear® open-architecture platform, the 9990-ENC-H264-IP offers easy-to-use DashBoard™ setup and control operator interface. Up to 10 of the cards can be installed in a 20-slot frame, offering distribution delivery of up to 20 individual or simulcast channels in a single frame, using less than 150W total, for reduced operating expenses. In addition to HD/SD-SDI inputs, the 9990-ENC-H264-IP provides the flexibility of supporting SD analog composite video and an analog audio stereo pair per input channel.
The 9990-ENC-H264-IP offers the latest advances in video compression that delivers excellent video quality at very low bit rates. Unique encoding designs allow delivery of multiple HD and SD video services simultaneously. The 9990-ENC-H264-IP provides two Ethernet outputs, supporting full-duplex 100 Mb/s and 1 Gb/s operation. Input video auto-detect mode allows encoding to automatically configure an output that correspond to the input, with resolution and frame rate same as input, and scaling set to same as input or other applicable choices.
Using HTTP Live Streaming, the 9990-ENC-H264-IP can transmit broadcast-quality video to mobile phones (Apple and Android 4.0 supported) and tablets.
Full user remote monitor/control allows full card status and control access across a standard Ethernet network. Status monitoring is also available at card edge.
Manufacturer Specs
Electrical
Power: 6 Watts
Processing Channels
9990-ENC-H264-IP: (1) channel
9990-ENC2-H264-IP: (2) channels
HD/SD-SDI Input
(1) input/channel; each configurable as:
HD-SDI (SMPTE 292M)
SD-SDI (SMPTE 259M) with EDH
Composite analog video (PAL/NTSC)
Audio Inputs Supported
Embedded SDI (1 pair/channel)
Unbalanced or balanced stereo audio pair (see Ordering Information)
Video Encoding
MPEG-4 AVC High profile at level 4.2 (HP@L4.2)
MPEG-4 AVC High profile at level 4.0 (HP@L4.0)
CBR & VBR
2Mbps to 12Mbps (configurable)
SD Video:
MPEG-4 AVC Main profile at level 3.0 (MP@L3.0)
CBR & VBR
1.5Mbps to 10 Mbps (configurable)
Audio Encoding
MPEG-4 AAC-LC
Lip sync adjustment
Video Resolution Supported
HD: 1080 x 1920p 60/50
1080 x 1920/1440i 25/29.97/30
720 x 1280/960/640p 50/59.94
SD: 576 x 720/528i 29.97fps
576 x 720/528i 25fps
Video Pre-Processing
Closed Captions CEA 608B and CEA-708C
WSS/AFD
Teletext (WST system B)
Management and Control
10/100Base-T Ethernet
Configuration Import/Export
Audible/visual fault warning
In-band and out-of-band control
SNMP v1, v2
Datasafe automated card configuration
Accurate bit rate control
Startup to streaming in seconds
Ethernet Outputs
Number of outputs: (2) 100/1000Base-T RJ-45 ports, auto-negotiate or fixed speed
IPv4, IPv6, UDP
Regulatory Compliance
CE: CE marked in accordance with 93/68/EEC (22/07/03) Directive
UL: UL approval
US FCC: Part 15
EMC: EN55022, EN55024, EN6100-3-2
The 9990-ENC-H264-IP HD/SD-SDI/CVBS H.264 Encoders with Streaming IP Output provide a card-based solution for distribution of MPEG-4 encoding. These encoders are specifically for distribution, with cost savings of offering only streaming IP instead of IP and DVB-ASI which is not needed for distribution. The 9990-ENC-H264-IP is perfectly suited for IP video distribution over the Internet or over a dedicated IP link. Utilizing the openGear® open-architecture platform, the 9990-ENC-H264-IP offers easy-to-use DashBoard™ setup and control operator interface. Up to 10 of the cards can be installed in a 20-slot frame, offering distribution delivery of up to 20 individual or simulcast channels in a single frame, using less than 150W total, for reduced operating expenses. In addition to HD/SD-SDI inputs, the 9990-ENC-H264-IP provides the flexibility of supporting SD analog composite video and an analog audio stereo pair per input channel.
The 9990-ENC-H264-IP offers the latest advances in video compression that delivers excellent video quality at very low bit rates. Unique encoding designs allow delivery of multiple HD and SD video services simultaneously. The 9990-ENC-H264-IP provides two Ethernet outputs, supporting full-duplex 100 Mb/s and 1 Gb/s operation. Input video auto-detect mode allows encoding to automatically configure an output that correspond to the input, with resolution and frame rate same as input, and scaling set to same as input or other applicable choices.
Using HTTP Live Streaming, the 9990-ENC-H264-IP can transmit broadcast-quality video to mobile phones (Apple and Android 4.0 supported) and tablets.
Full user remote monitor/control allows full card status and control access across a standard Ethernet network. Status monitoring is also available at card edge.
Manufacturer Specs
Electrical
Power: 6 Watts
Processing Channels
9990-ENC-H264-IP: (1) channel
9990-ENC2-H264-IP: (2) channels
HD/SD-SDI Input
(1) input/channel; each configurable as:
HD-SDI (SMPTE 292M)
SD-SDI (SMPTE 259M) with EDH
Composite analog video (PAL/NTSC)
Audio Inputs Supported
Embedded SDI (1 pair/channel)
Unbalanced or balanced stereo audio pair (see Ordering Information)
Video Encoding
MPEG-4 AVC High profile at level 4.2 (HP@L4.2)
MPEG-4 AVC High profile at level 4.0 (HP@L4.0)
CBR & VBR
2Mbps to 12Mbps (configurable)
SD Video:
MPEG-4 AVC Main profile at level 3.0 (MP@L3.0)
CBR & VBR
1.5Mbps to 10 Mbps (configurable)
Audio Encoding
MPEG-4 AAC-LC
Lip sync adjustment
Video Resolution Supported
HD: 1080 x 1920p 60/50
1080 x 1920/1440i 25/29.97/30
720 x 1280/960/640p 50/59.94
SD: 576 x 720/528i 29.97fps
576 x 720/528i 25fps
Video Pre-Processing
Closed Captions CEA 608B and CEA-708C
WSS/AFD
Teletext (WST system B)
Management and Control
10/100Base-T Ethernet
Configuration Import/Export
Audible/visual fault warning
In-band and out-of-band control
SNMP v1, v2
Datasafe automated card configuration
Accurate bit rate control
Startup to streaming in seconds
Ethernet Outputs
Number of outputs: (2) 100/1000Base-T RJ-45 ports, auto-negotiate or fixed speed
IPv4, IPv6, UDP
Regulatory Compliance
CE: CE marked in accordance with 93/68/EEC (22/07/03) Directive
UL: UL approval
US FCC: Part 15
EMC: EN55022, EN55024, EN6100-3-2